皮帶的檢查
Belt inspection
起動汽車引擎或在駕駛汽車的過程中，發現皮帶發響，原因分為兩種：一種是皮帶長期沒有調整造成，發現后及時調整即可。另外一個原因是皮帶老化，需要更換新皮帶。
When starting the car engine or driving the car, if you find that the belt is making noise, there are two reasons: one is that the belt has not been adjusted for a long time, and you can adjust it in a timely manner after discovering it. Another reason is that the belt is aging and needs to be replaced with a new one.
空氣濾清器的檢查
Inspection of air filter
空氣濾清器過臟或者堵塞，會直接導致發動機油耗增加，工作不良等情況。日常定期檢查空氣濾清器，若發現灰塵較少，堵塞不嚴重，可用高壓空氣從內向外吹凈，繼續使用，而過臟的空氣濾清器應及時更換。
Dirty or clogged air filters can directly lead to increased engine fuel consumption and poor operation. Regularly check the air filter on a daily basis. If there is less dust and less severe blockage, high-pressure air can be blown clean from the inside out and continue to use. Air filters that are too dirty should be replaced in a timely manner.
檢查汽油濾清器
Check the gasoline filter
假如發現供油不暢，應及時檢查汽油濾清器是否堵塞，發現堵塞就應該及時更換。
If poor fuel supply is found, the gasoline filter should be checked for blockage in a timely manner. If blockage is found, it should be replaced in a timely manner.
發動機冷卻液液面檢查
Engine coolant level inspection
等待發動機冷卻后，檢查冷卻液的液面應處于滿位和低位之間，如果不是，請立即添加蒸餾水純凈水或冷凍液，添加后的液面高度不能超過滿位。如發是冷卻液短時間內迅速減少，應檢查是否有泄漏或到專門汽車養護店檢查。
After waiting for the engine to cool down, check that the coolant level should be between full and low. If not, immediately add distilled water, purified water, or coolant. The height of the added liquid level should not exceed full. If the coolant rapidly decreases in a short period of time, it should be checked for leaks or checked at a specialized car maintenance shop.
輪胎的檢查
Tire inspection
胎壓直接關乎輪胎的安全性能，胎壓的過高或者過低都會引起不好的結果，夏季氣溫高，胎壓應該低一些，冬季氣溫低，胎壓應該足一些。還有檢查輪胎的龜裂情況，存在安全隱患時應及時更換輪胎，在選用新輪胎時，應與原輪胎型號一致。
Tire pressure directly affects the safety performance of tires. Excessive or insufficient tire pressure can lead to negative results. If the temperature is high in summer, the tire pressure should be lower, and if the temperature is low in winter, the tire pressure should be sufficient. Also, check the cracking of the tires. If there are safety hazards, replace the tires in a timely manner. When selecting new tires, they should be consistent with the original tire model.
With the summary of Jinan Audi car maintenance, we hope it can be helpful to our customers. If you have any questions or need help, please click on our website: gxnn10z.com or call us for consultation. We will do our best to help you solve the problem
